|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PI5A127 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 Dual, Wide Bandwidth Analog Switches Features * Single-Supply Operation (+2V to +6V) * Rail-to-Rail Analog Signal Dynamic Range * Low On-Resistance (7.2-ohm with 5V supply) Minimizes Distortion and Error Voltages * On-Resistance Flatness, 3-ohm typ. * Low Charge Injection Reduces Glitch Errors. Q = 1.6pC typ. * High Speed. tON = 7ns typ. * Wide -3dB Bandwidth: 326 MHz * High-Current Channel Capability: >100mA * TTL/CMOS Logic Compatible * Low Power Consumption (5W typ.) * Packaging (Pb-free & Green Available) -- 8-pin, 118 mil plastic MSOP (U) -- 8-pin, 150 mil plastic SOIC (W) Description The PI5A127 is a dual SPST (single-pole single-throw) analog switches designed for single supply operation. These high-precision devices are ideal for low-distortion audio, video, signal switching and routing. The PI5A127 is a normally closed (NC) switch. Each switch conducts current equally well in either direction when on. When off, they block voltages up to V+. These switches are fully specified with +5V and +3.3V supplies. With +5V, they guarantee <10 -ohm ON-resistance. On-resistance matching between channels is within 2-ohm. On-resistance flatness is less than 5-ohm over the specified range. These switches also guarantee fast switching speeds (tON < 20ns). These products are available in 8-pin SOIC and MSOP plastic packages for operation over the industrial temperature range (-40oC to +85oC). Applications * * * * * * * * Audio, Video Switching and Routing Battery-Powered Communication Systems Computer Peripherals Telecommunications Portable Instrumentation Mechanical Relay Replacement Cell Phones PDAs Functional Diagrams, Pin Configurations and Truth Tables COM1 1 NO1 2 IN2 3 GND 4 PI5A127 8 V+ 7 IN1 6 COM2 5 NO2 Top View Switches shown for logic "0" input Logic 1 0 PI5A127 O FF ON 1 PS8328E 01/26/06 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 PI5A127 Dual,Wide Bandwidth Analog Switch Absolute Maximum Ratings Voltages Referenced to GND V+ ............................................................................................. -0.5V to +7V VIN, VCOM, VNC, VNO (Note 1) ........................... -0.5V to V+ +2V ................................................... or 30mA, whichever occurs first Current (any terminal except COM,NO,NC) ........................ 30mA Current, COM, NO, NC ......................................................100mA (Pulsed at 1ms, 10% duty cycle) ........................................ 120mA Thermal Information Continuous Power Dissipation -6 (derate 7mW/C above +70C) ........................................ 550mW Storage Temperature ......................................... -65C to +150C Lead Temperature (soldering, 10s) .................................. +300C Note 1: Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to 30mA. Caution: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Electrical Specifications - Single +5V Supply Parame te r Analog Switch Analog Signal Range(3) On Resistance On- Resistance Match Between Channels(4) On- Resistance Flatness(5) NO or NC Off Leakage Current(6) COM Off Leakage Current(6) COM On Leakage Current(6) VANALOG RON Symbol (V+ = +5V 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Conditions Te mp. (C) M in.(2) Typ.(1) M ax.(2) Units Full 25 V+ = 4.5V, ICOM = -30mA, VNO or VNC = +2.5V Full 25 Full V+ = 5V, ICOM = -30mA, or VNC = 1V, 2.5V, 4V 25 Full 25 Full 25 Full 25 Full 0 7.2 V+ 10 12 0.20 2 4 2.72 3.5 4 0.18 V RON RFLAT(ON) VNO INO(OFF) or INC(OFF) V+ = 5.5V, VCOM = 0V, VNO or VNC = 4.5V V+ = 5.5V, VCOM = + 4.5V, VNO or VNC = 0V V+ = 5.5V , VCOM = +4.5V VNO or VNC = +4.5V -200 0.20 -200 0.20 -200 200 nA 200 ICOM(OFF) ICOM(ON) 200 Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design 4. RON = RON max - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of ON-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25C. 2 PS8328E 01/26/06 PI5A127 Dual,Wide Bandwidth Analog Switch 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 Electrical Specifications - Single +5V Supply (continued) (V+ = + 5V 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Parame te r Logic Input Input High Voltage Input Low Voltage Input Current with Voltage High Input Current with Voltage Low Dynamic Turn- On Time Symbol Conditions Te mp(C) M in.(1) Typ.(2) M ax.(1) Units VIH VIL IINH IINL Guaranteed logic High Level Guaranteed logic Low Level VIN = 2.4V, all others = 0.8V VIN = 0.8V, all others = 2.4V Full 2 0.8 -1 -1 0.005 0.005 1 1 V tON VCC = 5V, Figure 1 25 Full 25 Full CL = 1nF, Vgen = 0V, Rgen = 0, Figure 2 RL = 50, CL = 5pF, f = 10MHz, Figure 3 RL = 50, CL = 5pF, f = 10 MHz, Figure 4 f = 1kHz, Figure 5 f = 1kHz, Figure 6 RL = 50, Figure 7 RL = 10 Full 25 7 15 20 ns Turn- Off Time Charge Injection(3) Off Isolation Crosstalk NC or NO Capacitance COM Off Capacitance COM On Capacitance - 3dB Bandwidth Distortion Supply Power- Supply Range Positve Supply Current tOFF Q OIRR Xtalk C(off) Ccom(off) Ccom(on) BW D 1 7 10 1.6 -4 3 10 pC dB -43 5.5 5.5 13 326 0.2 MHz % pF V+ I+ V+ = 5.5V, VIN = 0V or VCC, V+ All Channels on or off Full 2 6 1 V A Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design. 3 PS8328E 01/26/06 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 PI5A127 Dual,Wide Bandwidth Analog Switch Electrical Specifications - Single +3.3V Supply (V+ = +3.3V 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Parame te r Analog Switch Analog Signal Range(3) On- Resistance VANALOG RON V+ = 3V, ICOM = -30mA, VNO or VNC = 1.5V 25 Full 25 V+ = 3.3V, ICOM = -30mA, VNO or VNC = 0.8V, 2.5V RFLAT(ON) Full 25 Full 3.5 1 0 12 V+ 18 22 1 2 4 5 V Symbol Conditions Te mp.(C) M in.(1) Typ.(2) M ax.(1) Units On- Resistance Match Between Channels(4) On- Resistance Flatness(3,5) Dynamic Turn- On Time RON tON V+ = 3.3V, VNO or VNC = 1.5V, Figure 1 25 Full 25 Full CL = 1nF, VGEN = 0V, RGEN = 0V, Figure 2 25 14 25 40 ns Turn- Off Time Charge Injection(3) Supply Supply Current tOFF Q 4.5 12 20 1. 3 10 pC I+ V+ = 3.6V, VIN = 0V or V+ All Channels on or off Full 1 A Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design 4. RON = RON max - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of ON-resistance measured. 4 PS8328E 01/26/06 PI5A127 Dual,Wide Bandwidth Analog Switch 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 Test Circuits/Timing Diagrams +5V V+ Switch Input +3V* NO or NC IN Logic Input GND COM RL 100ohm VOUT CL 15pF Switch Output 0V tON CL INCLUDES FIXTURE AND STRAY CAPACITANCE RL VOUT = VNO RL + RON LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES THAT HAVE OPPOSITE LOGIC * 1.5V FOR 3.3V SUPPLY Logic +3V Input 0V 50% tr <20ns tf <20ns tOFF VOUT 90% 90% ( ) Figure 1. Switching Time +5V V+ COM VGEN .1F NO or NC CL 1nF VOUT VOUT IN OFF ON ON VOUT OFF IN Logic Input GND IN OFF OFF Q = (VOUT)(CL) Figure 2. Charge Injection 5 PS8328E 01/26/06 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 PI5A127 Dual,Wide Bandwidth Analog Switch Test Circuits/Timing Diagrams (continued) 10nF +5V 10nF +5V COM 50-ohm V+ IN 0V or 2.4V Signal Generator 0dBm V+ COM 50-ohm COM Analyzer 50-ohm NC or NO GND Analyzer IN 50-ohm GND Figure 3. Off Isolation Figure 4. Crosstalk 10nF +5V V+ COM Capacitance Meter f = 1kHz IN NC or NO GND 0V or 2.4V Figure 5. Channel-Off Capacitance Figure 6. Channel-On Capacitance 10nF +5V V+ NC or NO COM Vo RL 50-ohm GND Rg = 50-ohm Figure 7. Bandwidth 6 PS8328E 01/26/06 PI5A127 Dual,Wide Bandwidth Analog Switch 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 Package Mechanical: 8-Pin MSOP (U) 15 Max. .003 .012 0.07 0.30 .003 .012 0.07 0.30 Gauge Plane .010 0.25 .016 .028 0.40 0.70 Detail A 15 Max. .037 0.95 REF 0- 6 .112 2.85 .120 3.05 15 MAX .114 2.90 .122 3.10 Detail A 15 MAX .114 2.90 .122 3.10 Package Mechanical: 8-Pin SOIC (W) 8 .149 .157 3.78 3.99 .0099 .0196 0.25 x 45 0.50 1 .189 .196 .016 .026 0.406 0.660 REF 4.80 5.00 1.35 1.75 SEATING PLANE 0-8 .0075 .0098 0.40 .016 1.27 .050 0.19 0.25 .053 .068 .2284 .2440 5.80 6.20 .050 BSC 1.27 .013 0.330 .020 0.508 .0040 0.10 .0098 0.25 X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS Ordering Information Ordering Code PI5A127UX PI5A127UEX PI5A127W PI5A127WX Package Code U U W W Package Type 8-pin MSOP Pb-free & Green, 8-pin MSOP (Tape/Reel) Narrow 8-pin SOIC Narrow 8-pin SOIC (Tape/Reel) Pericom Semiconductor Corporation * 1-800-435-2336 * http://www.pericom.com 7 PS8328E 01/26/06 |
Price & Availability of PI5A127WX |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |