 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NL7SZ19 1-of-2 Decoder/ Demultiplexer The NL7SZ19 is a 1 of 2 decoder/demultiplexer that can operate from 1.65 to 5.5 V. The device is fabricated in sub-micron CMOS for high speed and fast decode times. Both inputs and outputs are in high impedance state, when supply voltage is powered down. Both inputs are tolerant of voltages up to 5.5 volts, regardless of operating voltage. This device is suitable for low power decoding in a variety of applications. Features 6 1 SOT-363/SC70-6/SC-88 DF SUFFIX CASE 419B LE d http://onsemi.com MARKING DIAGRAM 6 LEd 1 = Device Marking = Date Code * High-Speed Propagation Delay * * * * * * * * * * tPD 2.7 nS (Typ), Load 50 pF @ 5.0 V 32 mA Output Drive Capability @ 5.0 V Power Down Impedance Inputs/Outputs in High-Z Broad VCC Operating Range 1.65 V to 5.5 V Surface Mount Technology SC-70, 6-Lead Packaging OVT* on I/Os Pb-Free Package is Available A 1 6 Y0 GND 2 5 VCC Typical Applications Cell Phones PDAs Digital Cameras Video Cameras E 3 (TOP VIEW) 4 Y1 Important Information PIN/FUNCTION TABLE Pin A E Y0 Function Decoder Address/Demultiplexer Select Decoder Output Enable/Demultiplexer Data Output 0 Output 1 * ESD Protection: HBM >2000 V * Latchup Max Rating: 300 mA * Pin to Pin Compatible with NC7SZ19 *Over Voltage Tolerance (OVT) enables input and output pins to function outside (higher) of their operating voltages, with no damage to the devices or to signal integrity. Y1 TRUTH TABLE E L L H A L H X Y0 = A + E L H H Y1 = A + E H L H X = Don't Care ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2004 1 November, 2004 - Rev. 4 Publication Order Number: NL7SZ19/D NL7SZ19 MAXIMUM RATINGS Symbol VCC VIN VOUT IIK IOK IOUT ICC IGND TSTG TL TJ qJA PD MSL FR VESD DC Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Sink Current DC Supply Current per Supply Pin DC Ground Current per Ground Pin Storage Temperature Range Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature Under Bias Thermal Resistance (Note 1) Power Dissipation in Still Air at 85C Moisture Sensitivity Flammability Rating ESD Withstand Voltage Oxygen Index: 28 to 34 Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) @ V1 t -0.5 V @ V1 t -0.5 V Rating Value -0.5 to +7.0 -0.5 to +7.0 -0.5 to +7.0 -50 -50 "50 "100 "100 -65 to +150 260 +150 250 180 Level 1 UL 94 V-0 @ 0125 in > 2000 > 150 n/a Unit V V V mA mA mA mA mA C C C C/W mW - - V Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute maximum-rated conditions is not implied. Functional operation should be restricted to the Recommended Operating Conditions. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2 ounce copper trace no air flow. 2. Tested to EIA/JESD22-A114-A. 3. Tested to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol VCC VCC VIN VOUT TA tr, tf DC Supply Voltage DC Supply Voltage, Data Retention Input Voltage Output Voltage Operating Temperature Input Rise and Fall Times VCC @ 1.8 " 0.15 V VCC @ 2.5 " 0.2 V VCC @ 3.3 " 0.3 V VCC @ 5.0 " 0.5 V Rating Value 1.65 to 5.5 1.5 to 5.5 0 to 5.5 0 to 5.5 -40 to 85 0 to 20 0 to 20 0 to 10 0 to 5 350 Unit V V V V C nS/V qJA Thermal Resistance C/W ORDERING INFORMATION Device Order N mber Number NL7SZ19DFT2 NL7SZ19DFT2G Package SC70-6 SC70-6 (Pb-Free) Shipping 3000 / Tape & Reel 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 NL7SZ19 DC ELECTRICAL CHARACTERISTICS VCC (V) 1.65 2.3 to 5.5 1.65 2.3-5.5 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 0.0 to 5.5 0.0 1.65 to 5.5 1.55 2.20 2.90 4.40 1.29 1.90 2.40 2.30 3.80 1.65 2.30 3.00 4.50 1.47 2.10 2.75 2.63 4.15 0.0 0.0 0.0 0.0 0.09 0.12 0.20 0.30 0.32 0.10 0.10 0.10 0.10 0.24 0.30 0.40 0.55 0.55 "0.1 1.0 1.0 TA = 255C Min 0.75 VCC 0.70 VCC 0.25 VCC 0.30 VCC 1.55 2.20 2.90 4.40 1.29 1.90 2.40 2.30 3.80 0.10 0.10 0.10 0.10 0.24 0.30 0.40 0.55 0.55 "1.0 10 10 V V Typ Max TA = -405C to 855C Min 0.75 VCC 0.70 VCC 0.25 VCC 0.30 VCC Max Unit V V Symbol VIH VIL Parameter High-Level Input Voltage Low-Level Output Voltage Condition IOH = -100 ma High-Level Output Voltage VIN = VIH or VIL VOH IOH = -3.0 mA IOH = -8.0 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA IOL = 100 ma Low-Level Output Voltage VIN = VIL or VIH VOL IOL = 3.0 mA IOL = 8.0 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA IIN IOFF ICC Input Leakage Current Power-Off Leakage Current Quiescent Supply Current VIN = 5.5 V, GND VIN or VOUT = 5.5 V VIN = 5.5 V, GND mA mA mA AC ELECTRICAL CHARACTERISTICS TA = 255C Symbol Parameter Condition CL = 15 pF RD = 1.0 MW CL = 50 pF RD = 500 MW CIN CPD Input Capacitance Power Dissipation Capacitance Note 5 VCC 1.8 " 0.15 2.5 " 0.2 3.3 " 0.3 5.0 " 0.5 3.3 " 0.3 5.0 " 0.5 0 3.3 5.0 Min 2.5 1.2 0.8 0.5 1.2 0.8 Typ 6.2 3.6 2.9 2.4 3.2 2.7 2.3 10.5 12.8 Max 10.5 6.0 4.1 3.2 5.1 4.0 TA = -405C to 855C Min 2.5 1.2 0.8 0.5 1.2 0.8 Max 11 6.4 4.5 3.5 5.4 4.3 Unit Figure Figures 1&3 Figures 1&3 nS tPLH tPHL Propagation Delay A or S to Y0 or Y1 nS pF pF Figure 2 5. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (I CCD) at no output loading and operating at 50% duty cycle (see Figure 2). CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICCDstatic). http://onsemi.com 3 NL7SZ19 VI OPEN GND RU A S CL OUTPUT INPUT RD A OUTPUT VCC A Figure 1. AC Test Circuit CL Includes Load and Stray Capacitance Input PRR = 1.0 MHz; tW = 500 ns Figure 2. ICCD Test Circuit Input = AC Waveform; tr = tf = 1.8 nS PRR = 10 MHz; Duty Cycle = 50% S Input = GND or x tr = 3 ns 90% INPUT 90% tf = 3 ns VCC 50% 10% tW tPHL 50% 10% GND tPLH VOH Out of Phase OUTPUT 50% 50% VOL tPLH tPHL VOH In Phase OUTPUT 50% 50% VOL Figure 3. AC Waveforms http://onsemi.com 4 NL7SZ19 PACKAGE DIMENSIONS SOT-363/SC70-6/SC-88 DF SUFFIX 6-LEAD PACKAGE CASE 419B-02 ISSUE U NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B-01 OBSOLETE, NEW STANDARD 419B-02. INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --- 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --- 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 A G 6 5 4 S 1 2 3 -B- D 6 PL 0.2 (0.008) N M B M J C DIM A B C D G H J K N S H K SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 NL7SZ19 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 NL7SZ19/D |
Price & Availability of NL7SZ19DFT2
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
