 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SI9986 Vishay Siliconix SI9986 Buffered H-Bridge FEATURES * * * * * * 1.0-A H-Bridge 200-kHz Switching Rate Shoot-Through Limited TTL Compatible Inputs 3.8- to 13.2-V Operating Range Surface Mount Packaging APPLICATIONS * * * * * * * VCM Driver Brushed Motor Driver Stepper Motor Driver Power Converter Optical Disk Drives Power Supplies High Performance Servo DESCRIPTION The SI9986 is an integrated, buffered H-bridge with TTL compatible inputs and the capability of delivering a continuous 1.0 A @ VDD = 12 V (room temperature) at switching rates up to 200 kHz. Internal logic prevents the upper and lower outputs of either half-bridge from being turned on simultaneously. Unique input codes allow both outputs to be forced low (for braking) or forced to a high impedance level. The SI9986 is available in an 8-Pin SOIC package, specified to operate over a voltage range of 3.8 V to 13.2 V and a the commercial temperature range of 0 to 70C (C suffix) and the industrial temperature range of -40 to 85C (D suffix). FUNCTIONAL BLOCK DIAGRAM, PIN CONFIGURATION AND TRUTH TABLE TRUTH TABLE INA 1 0 0 1 INB 0 1 0 1 OUTA 1 0 0 HiZ OUTB 0 1 0 HiZ ORDERING INFORMATION Part Number SI9986CY-T1 SI9986DY-T1 SI9986CY SI9986DY Temperature Range 0 to 70C -40 to 85C 0 to 70C -40 to 85C Package Tape and Reel Bulk (tubes) FaxBack 408-970-5600, request 70007 www.siliconix.com S-50826--Rev. D, 22-Mar-99 1 SI9986 Vishay Siliconix ABSOLUTE MAXIMUM RATINGSa Voltage on any pin with respect to ground . . . . . -0.3 V to VDD + 0.3 V Voltage on pins 5, 8 with respect to GND . . . . . . . . -1 V to VDD + 1 V Voltage on pins 1, 4 . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to GND + 1 V Peak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 A Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to 150C Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . 150C Maximum VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V Power Dissipationb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W JA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100C/W Operating Temperature Range SI9986CY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 to 70C SI9986DY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to 85C Notes a. Device mounted with all leads soldered or welded to PC board. b. Derate 10 mW/C above 25C. RECOMMENDED OPERATING RANGE VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 V to 13.2 V Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . 125C SPECIFICATIONS Limits Test Conditions Unless Specified Parameter Input Input Voltage High Input Voltage Low Input Current with Input Voltage High Input Current with Input Voltage Low VINH VINL IINH IINL VIN = 2 V VIN = 0 V -1 2 1 1 A V C Suffix, 0 to 70C D Suffix, -40 to 85C Symbol VDD = 3.8 to 13.2 V SA @ GND, SB @ GND Mina Typb Maxa Unit Output Output Voltage High VOUTH IOUT = -500 mA VDD = 10.8 V VDD = 4.5 V VDD = 10.8 V VDD = 4.5 V -10 10.5 4.1 3.4 10.7 4.3 3.7 0.2 0.2 0.1 0 0 VDD + 0.7 -0.7 10 0.3 0.4 0.4 A V IOUT = -300 mA, VDD = 3.8 V Output Voltage Low VOUTL IOLL IOLH VCLH VCLL IOUT = 500 mA IOUT = 300 mA, VDD = 3.8 V Output Leakage Current Low Output Leakage Current High Output V Clamp High Output V Clamp Low VOUT = 0, VDD = 13.2 V INA = INB 2 V, VOUT = VDD = 13.2 V INA = INB 2 V IOUT = 100 mA IOUT = -100 mA V Supply VDD Supply Current IDD IN = 100 kHz, VDD = 5.5 V INA = INB = 4.5 V, VDD = 5.5 V 2 300 mA A Dynamic Propogation Delay Time Notes a. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. b. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. TPHH TPHL VDD = 5.5 V 300 100 nS S-50826--Rev. D, 22-Mar-99 2 FaxBack 408-970-5600, request 70007 www.siliconix.com SI9986 Vishay Siliconix TYPICAL CHARACTERISTICS (25C UNLESS OTHERWISE NOTED) FaxBack 408-970-5600, request 70007 www.siliconix.com S-50826--Rev. D, 22-Mar-99 3 SI9986 Vishay Siliconix TYPICAL CHARACTERISTICS (25C UNLESS OTHERWISE NOTED) S-50826--Rev. D, 22-Mar-99 4 FaxBack 408-970-5600, request 70007 www.siliconix.com |
Price & Availability of SI9986
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
