 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Rev. 1.0 BSS 83 P SIPMOS (R) Small-Signal-Transistor Features * P-Channel * Product Summary Drain source voltage Drain-source on-state resistance Continuous drain current VDS RDS(on) ID 3 -60 2 -0.33 V Enhancement mode W A * Avalanche rated * Logic Level * dv/dt rated 2 1 VPS05161 Type BSS 83 P Package SOT-23 Ordering Code Q67041-S1416 Marking YAs Pin 1 G PIN 2 S PIN 3 D Maximum Ratings,at T j = 25 C, unless otherwise specified Parameter Symbol Continuous drain current Value -0.33 -0.27 Unit A ID T A = 25 C T A = 70 C Pulsed drain current I D puls EAS EAR dv/dt -1.32 9.5 0.036 6 kV/s T A = 25 C Avalanche energy, single pulse I D = -0.33 A , V DD = -25 V, RGS = 25 W Avalanche energy, periodic limited by Tjmax Reverse diode dv/dt mJ I S = -0.33 A, V DS = -48 V, di/dt = 200 A/s, T jmax = 150 C Gate source voltage Power dissipation VGS Ptot T j , T stg 20 0.36 -55...+150 55/150/56 V W C T A = 25 C Operating and storage temperature IEC climatic category; DIN IEC 68-1 Page 1 2003-06-23 Rev. 1.0 Thermal Characteristics Parameter Characteristics Thermal resistance, junction - soldering point ( Pin 3 ) SMD version, device on PCB: @ min. footprint @ 6 cm 2 cooling area 1) Symbol min. Values typ. - BSS 83 P Unit max. 150 K/W RthJS RthJA - - - 350 300 Electrical Characteristics, at T j = 25 C, unless otherwise specified Parameter Static Characteristics Drain- source breakdown voltage Symbol min. Values typ. -1.5 max. -2 A -0.1 -10 -10 2 1.4 -1 -100 -100 3 2 nA V Unit V(BR)DSS VGS(th) IDSS -60 -1 VGS = 0 V, I D = -250 A Gate threshold voltage, VGS = VDS I D = -80 A Zero gate voltage drain current VDS = -60 V, V GS = 0 V, T j = 25 C VDS = -60 V, V GS = 0 V, T j = 125 C Gate-source leakage current IGSS RDS(on) RDS(on) - VGS = -20 V, VDS = 0 V Drain-source on-state resistance W VGS = -4.5 V, I D = -0.27 A Drain-source on-state resistance VGS = -10 V, I D = -0.33 A 1Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70 m thick) copper area for drain connection. PCB is vertical without blown air. Page 2 2003-06-23 Rev. 1.0 Electrical Characteristics, at T j = 25 C, unless otherwise specified Parameter Symbol min. Dynamic Characteristics Transconductance Input capacitance BSS 83 P Values typ. max. Unit VDS2*I D*RDS(on)max , ID = -0.27 A VGS = 0 V, V DS = -25 V, f = 1 MHz Output capacitance gfs Ciss Coss Crss t d(on) 0.24 - 0.47 62 19 7 23 78 24 9 35 S pF VGS = 0 V, V DS = -25 V, f = 1 MHz Reverse transfer capacitance VGS = 0 V, V DS = -25 V, f = 1 MHz Turn-on delay time ns VDD = -30 V, V GS = -4.5 V, I D = -0.27 A, RG = 43 W Rise time tr - 71 106 VDD = -30 V, V GS = -4.5 V, I D = -0.27 A, RG = 43 W Turn-off delay time t d(off) - 56 70 VDD = -30 V, V GS = -4.5 V, I D = -0.27 A, RG = 43 W Fall time tf - 61 76 VDD = -30 V, V GS = -4.5 V, I D = -0.27 A, RG = 43 W Page 3 2003-06-23 Rev. 1.0 Electrical Characteristics, at T j = 25 C, unless otherwise specified Parameter Symbol min. Dynamic Characteristics Gate to source charge BSS 83 P Values typ. max. Unit Q gs Q gd Qg V(plateau) - 0.12 1.1 2.38 -2.94 0.18 1.65 3.57 - nC VDD = -48 V, ID = -0.33 A Gate to drain charge VDD = -48 , ID = -0.33 A Gate charge total VDD = -48 V, ID = -0.33 A, V GS = 0 to -10 V Gate plateau voltage V VDD = -48 V , I D = -0.33 A Parameter Reverse Diode Inverse diode continuous forward current Symbol min. Values typ. -0.84 59.4 37.5 max. -0.33 -1.32 -1.1 89 56 Unit IS ISM VSD trr Qrr - A T A = 25 C Inverse diode direct current,pulsed T A = 25 C Inverse diode forward voltage V ns nC VGS = 0 V, I F = -0.33 Reverse recovery time VR = -30 V, IF=I S , di F/dt = 80 A/s Reverse recovery charge VR = -30 V, IF=l S , diF/dt = 80 A/s Page 4 2003-06-23 Rev. 1.0 Power Dissipation Drain current parameter: VGS 10 V BSS 83 P BSS 83 P Ptot = f (TA) BSS 83 P ID = f (TA ) 0.38 -0.36 W A 0.32 -0.28 0.28 -0.24 Ptot ID -0.20 -0.16 -0.12 -0.08 -0.04 0.00 0 0.24 0.20 0.16 0.12 0.08 0.04 0.00 0 20 40 60 80 100 120 C 160 20 40 60 80 100 120 C 160 TA TA Safe operating area Transient thermal impedance I D = f ( VDS ) parameter : D = 0 , T A = 25 C -10 1 ZthJC = f (tp ) parameter : D = tp /T 10 3 BSS 83 P BSS 83 P A tp = 88.0s 100 s K/W -10 0 /I D = 10 2 ID RD -10 -1 S( ) on 1 ms Z thJC 10 1 D = 0.50 10 ms VD S 0.20 0.10 -10 -2 DC 10 0 0.05 single pulse 0.02 0.01 -10 -3 -1 -10 -10 0 -10 1 V -10 2 10 -1 -5 -4 -3 -2 -1 0 1 2 10 10 10 10 10 10 10 10 s 10 4 VDS Page 5 tp 2003-06-23 Rev. 1.0 Typ. output characteristic BSS 83 P Typ. drain-source-on-resistance I D = f (VDS); T j=25C parameter: tp = 80 s BSS 83 P RDS(on) = f (ID ) parameter: VGS BSS 83 P -0.80 Ptot = 0W jk i hlf e d g VGS [V] a -2.5 b -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0 -6.5 -7.0 -8.0 -10.0 W 6.5 a b c A 5.5 5.0 c RDS(on) -0.60 c d e f g 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 d e lfg i j hk ID -0.50 -0.40 h i -0.30 j bk l -0.20 -0.10 a VGS [V] = a b c d e f -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 g h i j -5.5 -6.0 -6.5 -7.0 k l -8.0 -10.0 0.5 0.00 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 V -5.0 0.0 0.00 -0.10 -0.20 -0.30 -0.40 -0.50 A -0.65 VDS ID Typ. transfer characteristics I D= f ( V GS ) VDS 2 x I D x RDS(on)max parameter: tp = 80 s -1.2 A Typ. forward transconductance gfs = f(ID); Tj=25C parameter: gfs 0.70 S -1.0 -0.9 -0.8 0.60 0.55 0.50 ID 0.45 gfs V -0.7 -0.6 -0.5 -0.4 -0.3 0.40 0.35 0.30 0.25 0.20 0.15 -0.2 -0.1 0.0 0.0 -1.0 -2.0 -3.0 -4.0 -6.0 0.10 0.05 0.00 0.00 -0.10 -0.20 -0.30 -0.40 -0.50 A ID -0.70 VGS Page 6 2003-06-23 Rev. 1.0 Drain-source on-state resistance Gate threshold voltage BSS 83 P RDS(on) = f (Tj) parameter : I D = -0.33 A, VGS = -10 V BSS 83 P VGS(th) = f (Tj) parameter: VGS = VDS , ID = -80 A -3.0 W RDS(on) 5.5 V 4.5 4.0 3.5 3.0 -1.5 2.5 2.0 1.5 1.0 0.5 0.0 -60 -20 20 60 100 C V GS(th) 98% -2.0 typ 98% 2% typ -1.0 -0.5 180 0.0 -60 -20 20 60 100 Tj 160 C Tj Typ. capacitances Forward characteristics of reverse diode C = f (VDS) parameter: VGS=0V, f=1 MHz 10 3 IF = f (VSD ) parameter: Tj , tp = 80 s -10 1 BSS 83 P pF A 10 2 -10 0 Ciss C Coss 10 1 -10 -1 Crss IF Tj = 25 C typ Tj = 150 C typ Tj = 25 C (98%) Tj = 150 C (98%) 10 0 0 -5 -10 -15 -20 -25 V -35 -10 -2 0.0 -0.4 -0.8 -1.2 -1.6 -2.0 -2.4 V -3.0 VDS VSD Page 7 2003-06-23 Rev. 1.0 Avalanche energy Typ. gate charge BSS 83 P EAS = f (Tj) para.: I D = -0.33 A , VDD = -25 V, RGS = 25 10 VGS = f (QGate ) parameter: ID = -0.33 A pulsed BSS 83 P -16 mJ V 8 -12 7 E AS VGS 6 5 4 3 -10 -8 0,2 VDS max 0,8 VDS max -6 -4 2 1 0 25 -2 45 65 85 105 125 C 165 0 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 nC 3.4 Tj QGate Drain-source breakdown voltage V(BR)DSS = f (Tj) BSS 83 P -72 V -68 -66 -64 -62 -60 -58 -56 -54 -60 V(BR)DSS -20 20 60 100 C 180 Tj Page 8 2003-06-23 Rev. 1.0 Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. BSS 83 P Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Page 9 2003-06-23 |
Price & Availability of BSS83P
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
