 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Semiconductor SL5015/P COMPANDOR Description The SL5015/P is an noise reduction IC for cordless phone. It is a compandor IC that consist of a compressor and an expander. Compandor reduces transmission noise by compressing and transmitting out going signals and expanding received signals. The ICs are designed for minimum requirement of external components and for low voltage operation. Small size is an advantage when used in equipment in which space is a premium. For DATA, input and output terminals are provided for convenience. Two styles of packaging, DIP and SOP, are available to meet different requirements. Features * Low voltage operation Vopr. = 2.4~7.0V * Low current consumption ICC = 4mA(Vcc=3V) * Microphone amplifier used in compressor * Has data input output terminals * Has a buffer amplifier for filter * Mute can be set up independently * Through Functions * Built in limiter (for compressor) Ordering Information Type NO. SL5015 SL5015P Marking SL5015 SL5015 Package Code SOP20 DIP20 Outline Dimensions SOP20 DIP20 unit : mm 0.58 10 1 0.89R 7.62 7.52 0.41 12.83 2.56 1.27 10.31 0.22 0.25 11 26.14 20 o 7 0.51 1.52 3.30 7.11 7.62 7o 2.54 0.46 22.84 oo 5-7 0.25 KSI-W003-000 1 SL5015/P Absolute Maximum Ratings Characteristics Maximum Supply Voltage Power Dissipations Operating Temperature Range Storage Temperature Range (Ta = 25 C) Symbol VCC PD Topr Tstg Rating 10 1000(D) note 1 410(S) note 2 -20 ~ 70 -55 ~ 150 Unit V mW C C * note 1. Above Ta=+25 C , derate at 8mW/C 2. Above Ta=+25 C, derate at 3.3mW/C Block Diagram and Test Circuit Vcc EXP.OUT D A T A O U T EXP.INW 2 S 10K 1 10K 10 600 + 2.2 10K 1 2.2 + 50pF + 0.047 + 4.7 + + 100K 51K 20 19 18 17 16 15 14 EXP. + REG. SW5 SW4 SW3 E X P .T COM MUTE HROUGH P. 13 12 11 MUTE LOGIC MUTE 100K R E G . + + COM 100K 100K 51K 3.3K 100K 4 6 2 3 5 7 8 9 10 1 RECT 1000pF DCF 1800pF10K + 1 0.047 0.1 + 2.2 + 2.2 9.1K + 10K 6000pF SW1 0.47 10K 600 10K 10K 600 COMP.OUT TA IN DA COMP.IN + 4.7 100K 1uF + FILTER OUT FILTER IN + KSI-W003-000 2 SL5015/P Switch Position Switch terminal PIN 11(SW3) PIN 12(SW4) PIN 13(SW5) PIN 8 (SW1) PIN 15 (SW2) High (Open or Vcc) Comp Mute OFF Compandor Exp Mute OFF Signal Input ae OFF Signal Input ae OFF Low(GND) Comp Mute ON Through Exp Mute ON Electrical Characteristics (Unless otherwise specified, Ta=25 C, Vcc=3V, f=1kHz, RL = 10 kU) Characteristics Squelch Current Reference Voltage Symbol ICCQ Vref Test Conditions No Signal - Min. 1.4 Typ. 4.0 1.5 Max. 6.5 1.55 Unit mA V Compre ssor Input Resistance Standard Input Level Gain error(1) Gain error(2) Through ON/OFF Diff. Distortion Noise output Muting attenuation Limiting voltage RIN VIN aGV(1) aGV(2) aGV THD VNO MATT VLI VOUT =300mVrms = 0dB VIN = -20dB VIN = -40dB VIN =0dB, 12 pin GND VIN = 620 U Rg= 620 U VIN = 0dB, 11 Pin GND 90 8.0 -0.5 -0.1 -1.5 60 1.15 120 12.5 0 0 0 0.5 3.0 80 1.35 17.0 +0.5 +1.0 +1.5 1.0 5.5 1.50 kU mV rms dB dB dB % mV rms dB Vp-p Expander Standard Input Level Gain error(1) Gain error(2) Gain error(3) Through ON/OFF Diff. Distortion Noise output Muting attenuation Max. output voltage VOUT aGV(1) aGV(2) aGV(3) aGV THD VNO MATT VOUT(max) VIN = 30mVrms = 0dB VIN = -10dB VIN = -20dB VIN = -30dB VIN = 0dB, 12 Pin GND VIN = 0dB Rg= 620 U VIN = 0dB, 13 pin THD 10% level KSI-W003-000 110 -0.5 -1.0 -1.5 -2.5 60 700 130 0 0 0 -1.0 0.5 10 80 800 160 +0.5 +1.0 +1.5 +0.5 1.5 30 mV rms dB dB dB dB % iVrms dB mV rms 3 Electrical Characteristics(continued) (Unless otherwise specified, Ta=25 C, Vcc=3V, f=1kHz, RL = 10 kU) SL5015/P Min. Typ. Max. Unit Characteristics Buffer Amp(LPF) Voltage Gain Freq Charact(1) Freq Charact(2) Distortion Symbol Test Conditions GV af 1 af 2 THD VIN = 300mVrms VIN =300mVrms, f=3kHz VIN =300mVrms, f=30kHz VIN = 300mVrms -0.5 -4.5 -75 - 0 -3 -60 0.02 0.5 0 -55 0.1 dB dB dB % (PIN VOLTAGE AT VCC=3V AND NO INPUT SIGNAL) Pin. No. 1 2 3 4 5 6 7 8 9 10 NAME FILTER OUT FILTER IN COMP OUT DATA IN C-DCF COMP RECT COMP NF COMP IN COMP REF GND TYPE. VAL 1.5 1.5 1.5 1.5 1.5 0.6 1.5 1.5 1.5 GND Unit V V V V V V V V V V Pin. No. 11 12 13 14 15 16 17 18 19 20 NAME COMP MUTE THROUGH EXP MUTE EXP REF EXP IN EXP NF DATA OUT EXP RECT EXP OUT VCC TYPE. VOL 1.3 1.3 1.3 1.5 1.5 1.5 1.5 0.6 1.5 VCC Unit V V V V V V V V V V Typical Performance Characteristics * Input Voltage VS Output Voltage 0 C o m p r e s s o r = 3.0V, Fin = 1.0KHz Vcc 1.0Vrms 0 Standard Level -10 -20 (100mVrms) -30 -40 Vout(dBV) -50 -60 -70 -80 -90 -100 -110 -80 Standard Level Expander Vcc = 3.0V, Fin = 1.0KHz -10 (300mVrms) -20 -30 Vout(dBV) -40 -50 -60 -70 -130 -110 -90 -70-60-50 -30 -120 -100 -80 -40 -20 (10mVrms) Vin(dBV) -70 -60 -50 -40 -30 -20 Vin(dBV) (30mVrms) -10 KSI-W003-000 4 |
Price & Availability of SL5015
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
