|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MRFIC0931/D Advance Information The MRFIC Line Balanced Transmit Mixer The MRFIC0931 is a balanced Gilbert cell mixer with LO buffer amplifier intended for transmit upmixer application. The device is usable for Industrial, Scientific and Medical (ISM), Cellular and PCS applications and is packaged in a low-cost surface mount package. * Usable 500-2000 MHz * High Output Power @ 1 dB Gain Compression, 3.6 Volts 0.9 dBm (Typ) @ 900 MHz -2 dBm (Typ) @ 1800 MHz * 2.7-4.8 Volts Operation * Balanced Design for Good LO Rejection * 47 mA (Max) Current @ 4.5 Volts 45 mA (Max) Current @ 3.6 Volts * Low Cost Surface Mount Package * Order MRFIC0931R2 for Tape and Reel. R2 suffix = 2,500 Units per 12 mm, 13 inch Reel. * Device Marking = M0931 MRFIC0931 BALANCED TRANSMIT MIXER SILICON MONOLITHIC INTEGRATED CIRCUIT CASE 751-05 (SO-8) ABSOLUTE MAXIMUM RATINGS Ratings Supply Voltage Input Power, IF and LO Operating Ambient Temperature Storage Temperature Symbol VCC PIF, PLO TA Tstg Value 5 +10 - 35 to + 85 - 65 to +150 Unit Vdc dBm C C RF OUT 1 8 RF OUT GND 2 7 VCC GND 3 6 IF IN IF IN 4 5 LO IN Pin Connections and Functional Block Diagram REV 1 (c)MOTOROLA RF DEVICE DATA Motorola, Inc. 1997 MRFIC0931 1 RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltages RF Frequency Range IF Frequency Range Symbol VCC fRF fIF Value 2.7 to 4.5 500 to 2000 0 to 250 Unit Vdc MHz MHz ELECTRICAL CHARACTERISTICS (TA = 25C, measured in circuit shown in Figure 1 or 2 as frequency indicates) Parameter RF Output Power (fIF = 88 MHz, fLO = 815 MHz, PLO = -10 dBm, PIF = -20 dBm, VCC = 4.5 V) LO Feed Through (fIF = 88 MHz, fLO = 815 MHz, PLO = -10 dBm, PIF = -20 dBm, VCC = 4.5 V) Undesired Sideband Output (fIF = 88 MHz, fLO = 815 MHz, PLO = -10 dBm, PIF = -20 dBm, VCC = 4.5 V) Small Sigal Conversion Gain (fIF = 100 MHz, PIF = -25 dBm, VCC = 3.6 V) 900 MHz (PLO = -10 dBm) 1800 MHz (PLO = -5 dBm) Power Output at 1 dB Gain Compression (fIF = 100 MHz, PIF = -25 dBm, VCC = 3.6 V) 900 MHz (PLO = -10 dBm) 1800 MHz (PLO = -5 dBm) Supply Current VCC = 4.5 V VCC = 3.6 V Min 2 -- -- Typ 4 -- -- Max 8 -16 - 25 Unit dBm dBc dBc -- -- 25 20 -- -- dB dB -- -- -- -- 0.9 -2 38 30 -- -- 47 45 dBm dBm mA mA C10 L4 T1 C9 T2 C8 RF OUTPUT 1 8 C7 2 7 C5 L3 VCC C6 3 6 C4 L2 IF IN C2 L1 C1 4 5 C3 LO IN C1, C4, C6, C10 C2 C3, C9 C5 C7 C8 1000 pF 13 pF 10 pF 100 pF 2.4 pF 2 pF L1, L3 L2 L4 T1, T2 Board Material 220 nH 3.3 nH 12 nH 1/8 50 Microstrip Epoxy/Glass r = 4.45 Figure 1. 903 MHz Configuration Test Circuit MRFIC0931 2 MOTOROLA RF DEVICE DATA C10 L3 T1 C9 T2 C8 RF OUTPUT 1 8 C7 2 7 C5 VCC C6 3 6 C4 L2 C3 LO IN C11 IF IN C2 L1 C1 4 5 C1, C6, C10 C2 C3, C4, C5, C8 C7 C9 C11 L1, L2 L3 T1, T2 Board Material 1000 pF 10 pF 100 pF 1.2 pF 2.7 pF 1 pF 180 nH 3.3 nH 2.7 nH 1/8 50 Microstrip Epoxy/Glass r = 4.45 Figure 2. 1800 MHz Applications Circuit MOTOROLA RF DEVICE DATA MRFIC0931 3 PACKAGE DIMENSIONS A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.18 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 0.25 B M CB S A S q CASE 751-05 ISSUE S Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. 81-3-5487-8488 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 INTERNET: http://motorola.com/sps MRFIC0931 4 MRFIC0931/D MOTOROLA RF DEVICE DATA |
Price & Availability of MRFIC0931 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |