| PART |
Description |
Maker |
| AN110 |
CS4235 Review Checklist
From old datasheet system
|
Cirrus Logic
|
| BS0060U-2G |
Eliminates overvoltage caused by fast rising transients
|
Shenzhen Bencent Electr...
|
| BS0300N-C-F |
Eliminates overvoltage caused by fast rising transients
|
Shenzhen Bencent Electr...
|
| BS0060N-C-F |
Eliminates overvoltage caused by fast rising transients
|
Shenzhen Bencent Electr...
|
| 0E2300K0 0E2350H0 0E3350H0 E21-E36 E23-50H 0E2100K |
MINIATURE Switch E21-E36 Series
Not recommended for new designs Please review our D4 series
8 Contact Ratings DC ratings optional
|
Cherry Semiconductor Corporation
Cherry Semiconductor Corpor...
Cherry Semiconductor Co...
|
| SP3002-04JTG SP3003-04XTG SP3004-04XTG |
Some Ethernet ports only need be protected for ESD and not for lightning induced transients
|
Littelfuse
|
| SLVU2.8-4 |
The SLVU2.8-4 was designed to protect low voltage, CMOS devices from ESD and lightning induced transients.
|
Littelfuse
|
| SAC10 SAC12 |
The SAC Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
|
Littelfuse
|
| 15KPA120A-HR 15KPA40A-HR 15KPA30A-HR |
The 15KPA-HR High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
|
Littelfuse
|
| 30KPA120A-HRA 30KPA30A-HRA |
The 30KPA-HR High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
|
Littelfuse
|
| SA5-0A-D |
The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients
|
Littelfuse
|
