... pin MUTE is pulled LOW and the am bit in the status-byte is set HIGH. Figure 4 shows the dependency of the automatic muting function on err...fm inputs regardless of RSSF/C4OV states, and whether the automatic muting function amDIS is enabled...
... pin MUTE is pulled LOW and the am bit in the status-byte is set HIGH. Figure 4 shows the dependency of the automatic muting function on err...fm inputs regardless of RSSF/C4OV states, and whether the automatic muting function amDIS is enabled...
Description
5.5 V, terrestrial digital sound decoder Terrestrial digital sound decoder for conventional intercarrier PLL-IF systems
am/fm Receivers
SDA 4331X
1 1.1 * * * * *
Overview Features
155 MHz fm and 40 MHz am input frequency 30 mVeff am and 50 mVeff fm sensitivity Additional open drain ports controlled by I2C Bus 2-pin quartz oscillator Fast phase de...
Description
From old datasheet system PLL with I2C Bus for am/fm Receivers
...ceiver * AF inputs for NICam or am sound (standard L) * AF outputs for Main and SCART * AF input and output signals selectable via the I2C-b...fm: f = 27 kHz).
VP
Fig.1 Block diagram of the bipolar TV/VTR-stereo decoder.
This text is ...
Description
TV and VTR stereo/dual sound processor with digital identification and I2C-bus control
...CD2 + 2.2 F 50 k 10 6 dB -6 dB am 250 mV RMS MAIN 6 dB
stereo transmission
1995 Mar 20
CD1 10 nF 10 nF am 3 dB 500 mV RMS 0 dB 5 k 12 ...fm: f = 27 kHz).
Preliminary specification
TDA9845
Fig.1 Block diagram of the bipolar TV/VT...
Description
TV and VTR stereo/dual sound processor with digital identification
...1995 May 23
CD1 10 nF 5% 6 dB (am) 2.2 k Vi1 2.2 k L+R ,A 2 250 mV RMS (am: 500 mV RMS) 35 k Vref 50 k Vi2 10 R, B 2.2 F 0 dB 5 k Vref L 10...fm: f = 27 kHz).
Fig.1 Block diagram of the bipolar TV/VTR-stereo decoder.
1995 May 23
6 dB (...
Description
TV and VTR stereo/dual sound processor with digital identification
...uencies: fm band: 10 to 250 MHz am band (high): 2 to 20 MHz am band (low): 0.5 to 10 MHz * Input sensitivity: fm band: 35 mVrms (50 mVrms at 130 MHz or higher frequency) am band (high, low): 35 mVrms * External reset input: During CPU and P...
Description
Ultralow-Voltage ETR Controller with On-Chip LCD Driver 超低电压东突控制器的片上LCD驱动
...in industrial and commercial fm/am equipment operating in the range 1400 - 1600 MHz. * Specified 26 Volts, 1490 MHz, Class AB Characteristics: Output Power -- 30 Watts Gain -- 9 dB Min @ 30 Watts (PEP) Efficiency -- 30% Min @ 30 Watts (PEP)...
...in industrial and commercial fm/am equipment operating in the range 1400-1600 MHz. * Specified 26 Volts, 1490 MHz, Class AB Characteristics Output Power -- 90 Watts (PEP) Gain -- 7.5 dB Min @ 90 Watts (PEP) Collector Efficiency -- 30% Min @...